# makeisdc1(.in) - version 1.3
# This file is included from Makefile(.in)
# PLEASE, DO EDIT THIS FILE.
# See README.make for details about how to modify this file. Basically it
# involves cut&paste of ready to use templates from README.make - blocks
# beginning with following text : PLEASE CUT&PASTE INTO .....
# Those blocks should be put at the end of this file.


# ======================= NAME OF ARCHIVE/TAR FILE  ======================
#
# If library is being built, then this usually is set to the name of the
# library, like: dal, hello, ril, common, etc. Otherwise name is chosen
# from names of executables/targets defined in this make file.

 TAR_FILE_NAME		= new0710b.tar

# ====================== ISDC SOFTWARE TREE BRANCH  ======================
# 
# As of version 1.3 (or later) ISDC_BRANCH is not used anymore. It is left
# for compatibility reasons with older software. You can left it as it is.

ISDC_BRANCH		= ${ISDC_SYS_SW}

# Below is a place for your modifications ...
# ========================= C EXECUTABLE TARGET  =========================
# PLEASE CUT&PASTE INTO makeisdc1.in FROM HERE UP TO END OF TARGET DEFN
#
C_EXEC_1_NAME		= j_src_lc
C_EXEC_1_SOURCES	= j_src_lc_main.c	\
			j_src_lc_params.c	\
			j_src_lc_work.c		\
			j_src_lc_bin.c		\
			j_src_lc_save.c		\
			j_ibr_get_jemx_arr_short.c
C_EXEC_1_OBJECTS	= j_src_lc_main.o	\
			j_src_lc_params.o	\
			j_src_lc_work.o		\
			j_src_lc_bin.o		\
			j_src_lc_save.o		\
			j_ibr_get_jemx_arr_short.o
C_EXEC_1_LIBRARIES	= -ldal3jemx -ldal3gen -ldal3hk -lcommon -lril -lpil -ldal -lcfitsio ${LAST_LIBS}

${C_EXEC_1_NAME}:	${C_EXEC_1_OBJECTS}
			${CC}  ${ALL_C_CFLAGS} -o ${C_EXEC_1_NAME} ${C_EXEC_1_OBJECTS} ${ALL_C_LDFLAGS} ${C_EXEC_1_LIBRARIES}

CLEAN_TARGETS		+= ${C_EXEC_1_NAME}
ALL_TARGETS		+= ${C_EXEC_1_NAME}
TO_INSTALL_BIN		+= ${C_EXEC_1_NAME}
TO_INSTALL_PAR		+= ${C_EXEC_1_NAME}.par
TO_INSTALL_HELP		+=
# ======================== END OF C EXECUTABLE TARGET  ===================
